Get a quote- Upload kitchen plan/ drawing

Your Details

(required)
(required)

needed in case we have any questions relating to the specifications

(required)
(required)

needed to calculate the template and fitting costs

When do you need the new worktops?

(required)

How many different colours would you like us to price ?

(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)

If you need any of the extra items below please check the box

(required)
Add up the total length you will need , For example 8 linear meters in total
(required)
Usual size is 100mm high
(required)
default (usual size) is 20mm thickness
(required)
Usually this is around 750mm high to meet the extractor. With some modern slanted panel extractors this may only need to be 500mm
(required)
This can be any size but usually its either around 600mm, 700mm, 900mm or 1100mm (if it's a range, aga splashback)
(required)
Usually 20mm but can be 30mm in some cases
(required)
For example 1700mm long
(required)
For example 1700mm long
(required)
Usually around 230mm including the overhang past the wall/ upstand
(required)
Usually around 230mm including the overhang past the wall/ upstand
(required)
Usually 20mm thickness due to the window frame
(required)
Usually 20mm thickness due to the window frame
(required)
From the information you have already entered above what number worktop needs the end panel/s
(required)
From the information you have already entered above what number worktop needs the end panel/s
(required)
How many ends of this worktop need an end Panel?, if its an island unit it may need 2 (both ends)
(required)
How many ends of this worktop need an end Panel?, if its an island unit it may need 2 (both ends)
(required)
Usually 30mm like the worktops but could be 20mm
(required)
Usually 30mm like the worktops but could be 20mm

Please make sure that your plan includes the basic details we need, such as

  • The sizes of the worktops needed ( With a proper kitchen plan, we will know this as the unit sizes should be shown)
  • Hob cut out position in relation to the worktops( With a proper kitchen plan, we will know this as the unit sizes should be shown)
  • Sink cut out position in relation to the worktops( With a proper kitchen plan, we will know this as the unit sizes should be shown)
  • If you have a under-mounted sink that requires a polished sink cut out ( if so 1 set of 5 drainer grooves + tap hole/s will be automatically included in your quote)
  • If you have an Inset sink that requires an un-polished sink cut out (if so, the sink sits on top, no drainer grooves or tap holes are needed )
  • Cut outs for pop up sockets
  • Any other cutouts that are not clearly marked or specified on the plan.
  • If you want the worktop extending into the windowsill in one solid piece with the worktop.
  • Any other details you think need to be added and quoted for that are not clear on the plan There is a section below that you can add any details relating to any of the above points if it cant be marked on the plan before you upload.
  • (required)
    If you are struggling to scan a hard paper copy of your plan into the computer but you have a smart phone or tablet with a camera you can access this webpage from that device and when you click "browse" to upload the file , take a picture of the plan to upload.

    Maximum size 10MB

    (required)
    This is case sensitive, use both upper and lower case
    CAPTCHA image